⭐ Key Takeaways
Quick answer: Our top pick is Final Verdict, with Final Verdict as a strong alternative.

Liquid cooling is what makes a high-end mini ITX gaming build practical, because a radiator moves CPU heat straight out of a chassis that has no room for a tall tower cooler. The catch is that radiator support is the first thing small cases give up, so the five picks below were chosen for the radiator size they accept, from a 240mm unit in an 11-liter sandwich case to 280mm support in roomier vertical towers. Two include the liquid cooler and power supply in the box.

As an Amazon Associate, we earn from qualifying purchases.

Top 3 picks at a glance

Quick Answer

The best mini ITX case for liquid cooling is the Lian Li A4-H2O if you want the smallest build, thanks to its 240mm radiator support in 11 liters. For a 280mm radiator, choose the SSUPD Meshroom S V2 or HYTE Revolt 3. The Cooler Master NR200P MAX V2 and NZXT H1 V2 include the cooler and power supply in the box.

Table of Contents

  • Lian Li A4-H2O
  • SSUPD Meshroom S V2
  • HYTE Revolt 3
  • Cooler Master NR200P MAX V2
  • NZXT H1 V2
  • How to Choose a Mini ITX Case for Liquid Cooling
  • Who Should Skip a Liquid-Cooled Mini ITX Build
  • FAQ
  • Final Verdict
  • Product and ASIN Reference

Lian Li A4-H2O

Tier: Premium

The A4-H2O, developed with DAN Cases, is the smallest case here at 11 liters, and it was designed around water cooling from the start. Its sandwich layout puts the graphics card behind the motherboard on the included PCIe 4.0 riser cable, which frees the top of the chassis for a 240mm radiator. That top mount accepts a radiator and fan stack up to 55mm thick in total, covering most 240mm all-in-one coolers. Graphics cards up to 322mm long and three slots thick fit in the GPU chamber, so current high-end cards are realistic. The trade-offs are the 55mm CPU cooler height, which rules out almost every air cooler, and space for a single 2.5-inch SSD alongside your M.2 drives. Pick this case when the smallest footprint matters more than storage bays or build elbow room.

Specs:
– Volume: 11 liters (326 x 140 x 244 mm)
– Radiator support: up to 240mm at the top, 55mm total thickness including fans
– GPU clearance: up to 322mm long, 3-slot
– CPU cooler height: up to 55mm
– PSU support: SFX and SFX-L
– Layout: sandwich with included PCIe 4.0 riser cable
– Storage: 1 x 2.5-inch drive

SSUPD Meshroom S V2

Tier: Mid-range

The Meshroom S V2 wraps a roughly 15-liter frame in fine mesh panels on nearly every side, and that breathability is paired with the strongest radiator support in this size class. With a mini ITX motherboard installed, the front mount takes a 240mm or 280mm radiator, a size up from what most sub-16-liter cases allow. Graphics cards up to 336mm long fit, and the layout allows up to a four-slot card in ITX mode, although that reduces CPU cooler clearance from 73mm to about 53mm. Power supply choice is unusually flexible: SFX, SFX-L and even ATX units can be used depending on the internal layout, and the frame can be reconfigured for larger motherboards with an optional longer riser cable. This is the pick for a 280mm radiator and maximum airflow without moving up to an 18-liter case; the listing covered here is the version sold without a riser cable, so budget for one separately.

Specs:
– Volume: about 14.9 liters (247 x 167 x 362 mm)
– Radiator support: 240mm or 280mm at the front in mini ITX layout
– GPU clearance: up to 336mm long, up to 4-slot in ITX mode
– CPU cooler height: up to 73mm (reduced in 4-slot GPU mode)
– PSU support: SFX, SFX-L or ATX depending on layout
– Panels: full mesh, tool-less removal
– Motherboard: mini ITX native, larger boards with optional riser

HYTE Revolt 3

Tier: Mid-range

The Revolt 3 is a vertical tower with a small desk footprint, a pop-out carry handle and side panels that remove without tools, making it the most portable and serviceable design here. Its side bracket supports 120mm, 140mm, 240mm and 280mm radiators up to 35mm thick, so a 280mm all-in-one fits without a squeeze. Graphics cards up to 335mm long and 58mm thick fit, covering triple-slot models, and storage covers one 3.5-inch drive plus two 2.5-inch drives. The case-only version listed here takes an SFX or SFX-L power supply that you supply yourself; a separate bundle version adds a 700W 80 Plus Gold unit. At 18.4 liters it is the joint-largest case here, so gains in radiator room and portability cost total volume.

Specs:
– Volume: 18.4 liters (253 x 178 x 409 mm)
– Radiator support: 120mm, 140mm, 240mm and 280mm, up to 35mm thick
– GPU clearance: up to 335 x 140 x 58 mm, triple-slot
– PSU support: SFX and SFX-L (case-only version)
– Storage: 1 x 3.5-inch, 2 x 2.5-inch
– Features: integrated carry handle, tool-free panels on all sides

Cooler Master NR200P MAX V2

Tier: Premium

The NR200P MAX V2 removes the two hardest shopping decisions in a small liquid-cooled build by including them: a custom 280mm all-in-one liquid cooler and an 850W SFX 80 Plus Gold power supply come pre-installed and pre-routed. The power supply is an ATX 3.1 design with a native connector for current high-end graphics cards, and a PCIe 4.0 riser cable is included for the vertical GPU mount. Clearance is the best here, with graphics cards up to 357.6mm long in a triple-slot configuration, and both a tempered glass panel and a vented steel panel are in the box so you can choose between showing the build and feeding the radiator more air. At 18.25 liters it matches the Revolt 3 on size, and the bundle means paying for parts you may already own, but for a first liquid-cooled ITX build nothing else here is this straightforward.

Specs:
– Volume: 18.25 liters (377 x 185 x 292 mm)
– Included cooling: pre-installed custom 280mm AIO liquid cooler
– Included PSU: 850W SFX, 80 Plus Gold, ATX 3.1 ready
– GPU clearance: up to 357.6mm long, triple-slot
– CPU cooler height: up to 67mm (air, with AIO removed)
– Riser: PCIe 4.0 cable included for vertical mounting
– Panels: tempered glass and vented steel both included

NZXT H1 V2

Tier: Premium

The H1 V2 takes the bundle idea further into a vertical console-style tower of about 15 liters. A 140mm all-in-one liquid cooler and a 750W SFX 80 Plus Gold power supply are integrated, the cables are pre-routed, and a PCIe Gen4 riser carries the graphics card, which can be up to 324mm long in a two-slot design.A 92mm rear fan helps exhaust GPU heat, and both fans are managed by the built-in CAM-enabled controller. The dual-chamber layout and tinted tempered glass front give it the cleanest desk look of the five. The limits are real, though: the 140mm radiator is the smallest here, so it suits mainstream CPUs better than flagship chips with high sustained power draw, the two-slot GPU ceiling excludes the thickest cards, and the integrated parts cannot be swapped later.

Specs:
– Dimensions: 405 x 196 x 196 mm (about 15 liters)
– Included cooling: integrated 140mm AIO liquid cooler, 92mm rear fan
– Included PSU: 750W SFX, 80 Plus Gold
– GPU clearance: up to 324mm long, 2-slot
– Riser: PCIe Gen4 extender included
– Layout: vertical dual-chamber, tinted tempered glass front panel

How to Choose a Mini ITX Case for Liquid Cooling

Start with the radiator, because it decides everything else. A 240mm radiator is the realistic ceiling in cases near 11 liters and is enough for most gaming CPUs; step up to a 280mm radiator if you plan a high-core-count chip or long rendering sessions, and accept a case of roughly 15 liters or more. Check the thickness limit as well as the length: the A4-H2O allows 55mm for radiator and fans combined, while the Revolt 3 caps radiator thickness at 35mm before fans.

Next, measure your graphics card in three directions. Length limits run from 322mm to 357.6mm, and slot thickness matters just as much: the H1 V2 stops at two slots, while the Meshroom S V2 can take a four-slot card in ITX mode at the cost of cooler clearance.

Finally, settle the power supply format before ordering. The A4-H2O and Revolt 3 need an SFX or SFX-L unit bought separately, the Meshroom S V2 can even take an ATX supply in some layouts, and the NR200P MAX V2 and H1 V2 include theirs, which removes the guesswork and the choice.

Who Should Skip a Liquid-Cooled Mini ITX Build

Skip this category if you upgrade parts often, because every case here makes component swaps slower than a mid tower, and the two bundle models lock you into their included cooler and power supply. Skip it if your graphics card is longer than about 358mm or thicker than four slots, since no mini ITX case in this group will take it. Also skip it if you need several 3.5-inch hard drives, because most of these cases offer one bay at most, and if you prefer air cooling, a conventional-layout case with 150mm or more of cooler clearance is a better fit than any sandwich design.

FAQ

Is a 240mm radiator enough for a gaming CPU in a mini ITX case?

For most gaming processors, yes. A 240mm all-in-one has enough surface area to keep mainstream and high-end gaming chips under control during play, which is why the 11-liter A4-H2O is built around one. A 280mm radiator is the safer choice for high-core-count CPUs under long all-core loads.

Can I use my existing ATX power supply in a mini ITX case?

Usually not. Most liquid-cooling ITX cases need the smaller SFX or SFX-L format. The Meshroom S V2 is the exception, since it can accept an ATX supply in certain layouts, while the NR200P MAX V2 and H1 V2 include an SFX supply in the box.

Do these cases include the riser cable for the graphics card?

The A4-H2O, NR200P MAX V2 and H1 V2 include a PCIe 4.0 or Gen4 riser cable. The Meshroom S V2 listing covered here is the version sold without a riser, so you need to add one, and the Revolt 3 mounts its card without one. Always match the riser generation to your motherboard and GPU.

Will a thick triple-slot graphics card fit in all five cases?

No. The A4-H2O, Meshroom S V2, Revolt 3 and NR200P MAX V2 all accept triple-slot cards, and the Meshroom S V2 goes further with a four-slot mode. The H1 V2 is limited to two-slot cards up to 324mm long, so measure thickness as well as length before choosing it.

Final Verdict

For the smallest liquid-cooled gaming PC, buy the Lian Li A4-H2O. For a 280mm radiator in a breathable mid-size frame, buy the SSUPD Meshroom S V2, and for portability with the same radiator size, buy the HYTE Revolt 3. If you would rather not shop for a cooler and power supply at all, the Cooler Master NR200P MAX V2 is the easiest route to a high-end build, while the NZXT H1 V2 suits compact desk setups with mainstream parts. Confirm radiator thickness, card length and slot count against the specs above before ordering.

Final Verdict

Final Verdict

Check price on Amazon

Final Verdict

Final Verdict

Check price on Amazon

Final Verdict

Final Verdict

Check price on Amazon

Final Verdict

Final Verdict

Check price on Amazon

Final Verdict

Final Verdict

Check price on Amazon

Related guides

Browse all Product Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.