- Top Pick: Samsung SSD 9100 PRO with Heatsink 8TB
- Runner-up: WD Black SN850X 8TB with Heatsink
- Also consider: Corsair MP600 PRO LPX 8TB
An 8TB NVMe SSD is the largest internal upgrade either a gaming PC or a PlayStation 5 can take, and it ends the delete-and-redownload cycle for good. Every drive in this roundup is an M.2 2280 stick rated at 8TB, clears Sony’s 5,500 MB/s recommended read speed for PS5 expansion, and is fast enough to serve as a main game library drive in a desktop. The Samsung 9100 PRO with Heatsink leads the list as the premium Gen5 option, the WD Black SN850X with Heatsink is the strongest Gen4 all-rounder, and the Lexar NM790 covers the budget tier.
Choosing between them comes down to three things: whether a heatsink is fitted, whether your motherboard has a Gen5 slot that can use the Samsung’s extra bandwidth, and how much endurance you want behind a library this large. The picks below span premium, mid-range and budget tiers, and each one is described from its published specifications.
As an Amazon Associate, we earn from qualifying purchases.
Top 3 picks at a glance
Quick Answer
For most buyers, the WD Black SN850X 8TB with Heatsink is the safest pick: Gen4 speeds up to 7,200 MB/s read and 6,600 MB/s write, a factory heatsink that fits the PS5, and 4,800 TBW endurance. With a PCIe 5.0 motherboard, choose the Samsung 9100 PRO with Heatsink instead. On a budget, the DRAM-less Lexar NM790 still offers 7,000 MB/s reads and 6,000 TBW.
Table of Contents
- Why 8TB Is the New Ceiling for Game Libraries
- Samsung SSD 9100 PRO with Heatsink 8TB
- WD Black SN850X 8TB with Heatsink
- Corsair MP600 PRO LPX 8TB
- Sabrent Rocket 4 Plus 8TB
- Lexar NM790 8TB
- How to Choose
- Who Should Skip an 8TB NVMe SSD
- FAQ
- Final Verdict
- Product and ASIN Reference
Why 8TB Is the New Ceiling for Game Libraries
Sony raised the PS5’s M.2 expansion limit from 4TB to 8TB with a 2023 system software update, so 8TB is now the maximum capacity on both platforms. The console’s other requirements still apply: a PCIe Gen4 x4 (or faster) M.2 NVMe drive, a recommended sequential read speed of 5,500 MB/s or higher, a heatsink, and total dimensions within the expansion bay’s limits. On the PC side, any motherboard with a Gen4 or Gen5 M.2 slot accepts these drives, and Gen5 models run at Gen4 speeds in older slots and in the PS5.
Samsung SSD 9100 PRO with Heatsink 8TB
The 9100 PRO is Samsung’s PCIe 5.0 flagship and the fastest drive here by a wide margin on paper. Samsung rates the 8TB heatsink model at up to 14,800 MB/s sequential read and 13,400 MB/s sequential write under NVMe 2.0, roughly double its Gen4 predecessor. The fitted heatsink keeps the drive within the PS5’s size limits, and Samsung markets this version as compatible with both PC and PlayStation 5. In a console it is capped at Gen4 bandwidth, so the Gen5 headroom only pays off in a PC with a PCIe 5.0 M.2 slot, where it suits huge game installs, capture work and fast library transfers. Endurance is rated at 4,800 TBW with a five-year limited warranty. This is the premium pick for builders who want the fastest interface available today.
Specs:
- Capacity: 8TB
- Interface: PCIe 5.0 x4, NVMe 2.0
- Form factor: M.2 2280 with heatsink fitted
- Sequential read: up to 14,800 MB/s
- Sequential write: up to 13,400 MB/s
- Endurance: 4,800 TBW
- Warranty: 5-year limited
- Model: MZ-VAP8T0CW
WD Black SN850X 8TB with Heatsink
The SN850X is the Gen4 benchmark in this roundup. WD rates the 8TB model at up to 7,200 MB/s read and 6,600 MB/s write, comfortably above the PS5’s recommended floor, and the heatsink version is shaped for the console’s expansion bay as well as desktop slots. It uses SANDISK TLC 3D NAND with an onboard DRAM cache, which helps it hold performance during long install and copy sessions, and WD’s Game Mode 2.0 firmware feature is available through the WD Black Dashboard software on PC. The 8TB model carries a 4,800 TBW endurance rating and a five-year warranty. For a single drive that has to serve a PS5 today and a gaming PC tomorrow, this is the mid-range-to-premium sweet spot.
Specs:
- Capacity: 8TB
- Interface: PCIe Gen4 x4, NVMe
- Form factor: M.2 2280 with heatsink fitted
- Sequential read: up to 7,200 MB/s
- Sequential write: up to 6,600 MB/s
- Cache: onboard DRAM
- Endurance: 4,800 TBW
- Warranty: 5-year
- Model: WDS800T2XHE
Corsair MP600 PRO LPX 8TB
Corsair built the MP600 PRO LPX specifically around the PS5 brief. Its low-profile aluminum heatsink measures 80 x 23 x 11 mm, inside Sony’s 11.25 mm height limit, and Corsair rates the 8TB model at up to 7,100 MB/s sequential read and 6,800 MB/s sequential write over a PCIe Gen4 x4 NVMe 1.4 interface. The drive uses 3D TLC NAND behind a Phison E18 controller and carries the joint-highest endurance figure in this roundup at 6,000 TBW, backed by a five-year warranty. Those numbers make it a strong fit for a console library that gets churned often, and it works just as well as a desktop game drive. This is the mid-range pick for PS5 owners who want a factory-fitted cooler and top-tier Gen4 writes.
Specs:
- Capacity: 8TB
- Interface: PCIe Gen4 x4, NVMe 1.4
- Form factor: M.2 2280 with low-profile heatsink fitted
- Sequential read: up to 7,100 MB/s
- Sequential write: up to 6,800 MB/s
- Endurance: 6,000 TBW
- Warranty: 5-year
- Model: CSSD-F8000GBMP600PLP
Sabrent Rocket 4 Plus 8TB
The Rocket 4 Plus was one of the first 8TB consumer NVMe drives to ship, and it remains a credible mid-range option. Sabrent rates it at up to 7,100 MB/s read and 6,600 MB/s write from a Phison E18 controller, with the 8TB model using Kioxia BiCS5 TLC NAND on a double-sided board. Sony’s expansion bay accepts double-sided drives, so the layout is not a problem in a PS5, but this version ships without a heatsink, so console buyers need to add one or choose Sabrent’s separate PS5 heatsink bundle. Endurance is rated at 5,600 TBW. The warranty runs one year as standard and extends to five years when the drive is registered with Sabrent, a step worth completing at install time.
Specs:
- Capacity: 8TB
- Interface: PCIe Gen4 x4, NVMe 1.3
- Form factor: M.2 2280, double-sided, no heatsink fitted
- Sequential read: up to 7,100 MB/s
- Sequential write: up to 6,600 MB/s
- Controller: Phison PS5018-E18
- Endurance: 5,600 TBW
- Warranty: 1 year, extendable to 5 years with registration
- Model: SB-RKT4P-8TB
Lexar NM790 8TB
The NM790 is the budget route to 8TB. It is a DRAM-less design that uses Host Memory Buffer support instead of onboard cache, paired with a Maxio MAP1602 controller and 232-layer TLC NAND. Lexar rates the 8TB model at up to 7,000 MB/s sequential read and 6,200 MB/s sequential write, a step below the DRAM-equipped drives above but still well past the PS5’s recommended 5,500 MB/s floor. Endurance is a strong point at 6,000 TBW, matching the Corsair, and the warranty runs five years. There is no heatsink on this version, only a thin heat-spreader label, so PS5 buyers must fit a heatsink before installation. For a PC game library where the drive mostly reads, it covers the capacity brief for less money than the premium tier.
Specs:
- Capacity: 8TB
- Interface: PCIe Gen4 x4, NVMe 1.4
- Form factor: M.2 2280, no heatsink fitted
- Sequential read: up to 7,000 MB/s
- Sequential write: up to 6,200 MB/s
- Cache: DRAM-less, Host Memory Buffer
- Endurance: 6,000 TBW
- Warranty: 5-year
- Model: LNM790X008T-RNNNU
How to Choose
Start with the heatsink. A PS5 installation requires one, so the Samsung, WD and Corsair drives work out of the box, while the Sabrent and Lexar need a heatsink added before they go into a console. In a desktop, a motherboard’s bundled M.2 heatsink usually covers a bare drive.
Next, match the interface to your motherboard. A Gen5 slot unlocks the Samsung 9100 PRO’s full rated bandwidth; in a Gen4 slot it performs like a fast Gen4 drive, so Gen5 money only makes sense if the rest of the system can use it. For pure game loading, the gap between the Gen4 picks here is small, because all of them clear 7,000 MB/s on reads.
Finally, look at endurance and warranty rather than peak speed. An 8TB library drive absorbs full game installs, patches and captures, so the 6,000 TBW ratings of the Corsair and Lexar and the five-year warranties across this list matter more over time than a few hundred MB/s. Also confirm the drive’s height with its heatsink fitted stays within the PS5’s 11.25 mm limit if it is headed for a console.
Who Should Skip an 8TB NVMe SSD
Skip 8TB if your library is small. A 2TB or 4TB drive holds a rotating set of games comfortably, and the cost per terabyte is lower at those capacities. Skip it if your PC only has a Gen3 slot free, since every drive here would be capped at Gen3 bandwidth and the premium is wasted. Laptop owners should also check thickness and power limits before assuming an 8TB double-sided or heatsink model fits. And if the drive is for a PS5 only, a Gen5 model brings no benefit today, because the console’s interface is Gen4.
FAQ
Does the PS5 support 8TB NVMe SSDs?
Yes. Sony raised the M.2 expansion ceiling to 8TB with a 2023 system software update. The drive still has to meet the other requirements: PCIe Gen4 x4 interface, a recommended read speed of 5,500 MB/s or faster, a heatsink, and dimensions that fit the expansion bay.
Is a Gen5 SSD like the Samsung 9100 PRO faster in a PS5?
No. The PS5’s M.2 slot is a PCIe Gen4 interface, so a Gen5 drive runs at Gen4 speeds in the console. The 9100 PRO’s rated 14,800 MB/s read speed is only reachable in a PC motherboard with a PCIe 5.0 x4 M.2 slot.
Do I need a heatsink for an 8TB SSD in a gaming PC?
Usually the heatsink supplied with your motherboard is enough for a bare drive such as the Sabrent or Lexar. Sustained writes generate more heat at 8TB simply because transfers run longer, so some form of heatsink is recommended on either platform, and it is mandatory for PS5 use.
Why are some 8TB models rated slower than their 4TB versions?
Manufacturers publish per-capacity ratings, and the 8TB models sometimes use different NAND layouts or cache configurations. Lexar, for example, rates the 8TB NM790 at up to 7,000 MB/s read while smaller NM790 models are rated higher. Always check the figures for the exact capacity you are buying.
Final Verdict
For a single 8TB drive that works everywhere, the WD Black SN850X with Heatsink is the default recommendation: fast Gen4 performance, a console-ready cooler and a five-year warranty. The Samsung 9100 PRO with Heatsink is the premium pick for Gen5 PC builds, the Corsair MP600 PRO LPX pairs the best Gen4 write speed with the joint-best endurance for PS5 libraries, the Sabrent Rocket 4 Plus remains a solid mid-range option, and the Lexar NM790 is the budget way to reach 8TB without giving up a 6,000 TBW rating.
Related guides
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.




