The fanxiang S690Q is a budget-focused internal SSD built around the PCIe Gen4 x4 interface and the NVMe 1.4 protocol. In this 1TB version it uses the standard M.2 2280 form factor, so it drops into the storage slot of most modern desktops and laptops, and fanxiang also markets it as an expansion drive for the PS5. The headline figure is a sequential read rating of up to 4,800 MB/s, which puts it well beyond SATA drives and entry-level Gen3 models, even if it sits below the fastest flagship Gen4 drives.

To hit its budget positioning, the S690Q pairs 3D QLC NAND with a DRAM-less controller design and dynamic SLC caching rather than a dedicated DRAM chip. That combination is common in this tier and shapes both the strengths and the limits of the drive. This review walks through the published specifications, the endurance rating, the cooling arrangement, and the types of systems this SSD makes sense for, so you can judge whether its trade-offs fit your build.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The fanxiang S690Q 1TB is a budget PCIe Gen4 M.2 SSD rated at up to 4,800 MB/s reads and 2,900 MB/s writes, using QLC NAND, a DRAM-less design, and dynamic SLC caching. It fits desktops, laptops, and the PS5 expansion slot, carries a 320 TBW endurance rating, and is backed by a 5-year warranty.

Key Specs

Specification Detail
Model fanxiang S690Q (S690Q-1TB)
Capacity 1TB
Form factor M.2 2280
Interface PCIe Gen4 x4, NVMe 1.4
Sequential read Up to 4,800 MB/s
Sequential write Up to 2,900 MB/s
NAND type 3D QLC NAND with dynamic SLC cache
DRAM cache None (DRAM-less design)
Controller not stated
Endurance rating 320 TBW
Cooling Graphite cooling sticker; no metal heatsink included
Weight 7 g
Compatibility Windows, Linux, and PS5; desktops and laptops
Warranty 5-year manufacturer warranty

Two details stand out in that table. First, the rated write speed of 2,900 MB/s is noticeably lower than the read speed, which is typical for QLC-based drives in this class. Second, the 320 TBW endurance rating is modest next to TLC drives of the same capacity, so the S690Q is best viewed as a game library and general-purpose drive rather than a heavy-duty scratch disk.

Who It’s For / Who Should Skip It

The S690Q is a sensible pick for budget gaming PC builders who want Gen4 read speeds for game loading and everyday responsiveness without paying flagship prices. It also suits laptop owners with a free M.2 2280 slot who are upgrading from a smaller or slower drive, and general users who need a full terabyte for a growing game library, applications, and media files. PS5 owners looking for extra game storage at the budget end of the market are part of the target audience too, with the cooling caveat covered in the questions below.

Skip it if your workload involves frequent very large file transfers, such as daily video editing exports or constant multi-gigabyte backups. Like most DRAM-less QLC drives, the S690Q leans on its SLC cache for write bursts, and sustained writes can slow once that cache fills. Also skip it if you want the top speed tier of Gen4, since flagship drives are rated far above 4,800 MB/s reads, or if you need a high endurance rating for write-heavy professional use. Finally, PS5 owners who want to follow Sony’s recommended read speed of 5,500 MB/s to the letter should look at faster drives, because this one is rated below that figure.

How It Compares

Against flagship Gen4 drives from the major brands, the S690Q gives up peak speed, a DRAM cache, and usually a chunk of endurance rating, and in return it competes in the budget tier. For game loading, system booting, and everyday file work, the practical gap between a 4,800 MB/s drive and a much faster one is smaller than the specification sheets suggest, because games and applications rarely sustain peak sequential transfers for long.

Against budget Gen3 drives, the comparison flips: the S690Q offers a higher read ceiling on any motherboard or laptop with a Gen4 slot, plus a modern NVMe 1.4 feature set, while remaining backward compatible with Gen3 slots at reduced speeds. Against SATA SSDs there is no real contest on paper, since the NVMe interface removes the SATA bandwidth ceiling entirely. The S690Q’s closest rivals are other DRAM-less QLC Gen4 drives in the same tier, and among those, its combination of a 4,800 MB/s read rating, a 320 TBW endurance figure, and a 5-year warranty is competitive for the class.

Frequently Asked Questions

Does the fanxiang S690Q work in a PS5?

Yes, the drive matches the PS5 expansion requirements for form factor and interface, and fanxiang markets this model for PS5 use. Two cautions apply. Sony recommends a heatsink or cooling structure for expansion drives, and the S690Q ships with a graphite cooling sticker rather than a full metal heatsink, so adding a slim aftermarket heatsink is a wise step. Sony also recommends a sequential read speed of 5,500 MB/s or faster, and this drive is rated at 4,800 MB/s, so buyers who want to meet that guideline exactly should choose a faster model.

What happens if I install the S690Q in a PCIe Gen3 slot?

The drive is backward compatible and will work in a Gen3 M.2 slot, in an older laptop, or on an older motherboard. Performance is then capped by the Gen3 interface, so you will not see the full 4,800 MB/s read rating until the drive is moved to a Gen4 slot. Capacity, endurance, and warranty are unaffected by the slot generation.

How does the DRAM-less design affect everyday use?

The S690Q has no dedicated DRAM cache chip and instead relies on dynamic SLC caching, where a portion of the QLC NAND temporarily behaves like faster SLC storage. Short bursts such as game loads, application launches, and ordinary file copies are handled by that cache and feel quick. During very long continuous writes, such as copying a huge folder in one pass, speeds can step down once the cache is exhausted, which is normal behavior for this design.

How long should the S690Q last?

fanxiang rates the 1TB model at 320 TBW, meaning 320 terabytes of total writes, and backs it with a 5-year manufacturer warranty. For a typical gaming and general-use PC, which writes far less data per day than that budget allows, the rating should cover years of service. Write-heavy users who record, render, or download constantly may prefer a drive with a higher endurance rating.

Final Verdict

The fanxiang S690Q 1TB is an honest budget Gen4 drive: it publishes a 4,800 MB/s read rating, a 2,900 MB/s write rating, a 320 TBW endurance figure, and a 5-year warranty, and it makes no attempt to dress itself up as a flagship. Its QLC NAND and DRAM-less layout are real compromises for sustained writes, and PS5 buyers should budget for a slim heatsink and note the below-recommendation read speed. For a gaming PC, a laptop upgrade, or a secondary game library drive where value matters more than peak numbers, those trade-offs are reasonable, and the S690Q earns a recommendation as a budget-tier pick.

Related guides

Browse all Product Guides guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.