A monitor light bar clamps to the top of your display and throws light down onto the desk instead of into the screen, so a gaming setup stays readable in a dark room without the reflections a normal desk lamp creates. The BenQ ScreenBar Halo 2 is the most complete pick here, pairing a glare-free front light with a rear backlight that softens the contrast between a bright monitor and a dark wall. The BenQ ScreenBar Pro is the better fit for ultrawide and curved monitors, while the original BenQ ScreenBar remains the simple, proven option. From Quntis, the ScreenLinear Pro+ covers the mid-range with a wireless remote and auto-dimming, and the Monitor Light Bar RGB Pro adds a gaming-style RGB backlight on a budget.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

BenQ ScreenBar Halo 2

Check price on Amazon

Check price on Amazon

Tier: Premium

The Halo 2 is BenQ’s flagship light bar and the only pick here that lights both sides of the monitor. The front light uses the company’s asymmetric ASYM-Light optics with an 18-degree cut-off angle, so the beam lands on the desk rather than the panel or your eyes, and center illuminance is rated above 1,000 lux at a 50 cm mounting height. Behind the bar, a patented tri-zone backlight washes the wall with ambient light, which keeps the contrast between screen and room closer to the ANSI-recommended ratio and makes long evening sessions easier on the eyes.

Controls are the other headline feature. A wireless dial with its own display handles brightness, color temperature and light modes for both light sources independently, and it runs for up to three months per charge according to BenQ. An ultrasonic presence sensor switches the light on when you sit down within about 60 cm and off again after five minutes away, while an ambient light sensor auto-dims output to hold the desk near 500 lux. The clamp fits flat and curved monitors from 0.43 to 6 cm thick, including 1000R to 1800R curves, and a webcam mount accessory is included in the box.

Specs

  • Light sources: dual LED, front task light plus tri-zone rear backlight
  • Center illuminance: above 1,000 lux at 50 cm height
  • Lighting coverage: 85 x 50 cm at 500 lux
  • Color temperature: 2,700K to 6,500K, stepless, both light sources
  • Color rendering: Ra 95 or higher, Rf 96 or higher (front light)
  • Controls: wireless controller with display, touch panel on the bar
  • Sensors: ultrasonic presence sensor, ambient light sensor with auto-dimming
  • Monitor fit: flat and curved, 0.43 to 6 cm thick, 1000R to 1800R curvature
  • Power: USB-C, 5V at up to 3A, 15 W maximum
  • Dimensions and weight: bar 50 x 14.3 x 10.9 cm, 0.8 kg

BenQ ScreenBar Pro

Check price on Amazon

Tier: Premium

The ScreenBar Pro is built for the wide end of the monitor market. Its 50 cm bar delivers center illuminance above 1,000 lux and lights an 85 x 50 cm area at 500 lux, which is enough coverage for a 34-inch or 38-inch ultrawide plus the desk space in front of it. The third-generation asymmetric optics keep that light off the panel, and a full-spectrum LED chip with a color fidelity rating above Rf 96 keeps colors on the desk looking natural, which matters if the same desk doubles for photo or design work.

The patented clamp is the Pro’s other strength. It fits monitors from 0.43 to 6.5 cm thick, the widest range in this roundup, and it is shaped to sit securely on ultra-thin bezels and curved panels without blocking a top-mounted webcam; a dedicated webcam mount is included. Like the Halo 2, it carries an ultrasonic presence sensor and real-time auto-dimming that holds brightness at the ANSI-recommended 500 lux. It runs from USB-C at up to 8.5 W and can be powered from the monitor’s own USB-C port or the included adapter. What it gives up against the Halo 2 is the rear backlight and the wireless dial, so it suits bright, even front light on a big screen rather than ambient mood lighting.

Specs

  • Light source: full-spectrum LED, front light only
  • Center illuminance: above 1,000 lux at 50 cm height
  • Lighting coverage: 85 x 50 cm at 500 lux
  • Color temperature: 2,700K to 6,500K, stepless
  • Color fidelity: Rf above 96
  • Controls: touch controls on the bar
  • Sensors: ultrasonic presence sensor, ambient light sensor with auto-dimming
  • Monitor fit: flat and curved, 0.43 to 6.5 cm thick
  • Power: USB-C, 5V at up to 1.7A, 8.5 W maximum, adapter included
  • Dimensions: 50 x 13.5 x 9.2 cm

BenQ ScreenBar

Tier: Mid-range

The original ScreenBar is the product that created this category, and it is still the straightforward pick for a single flat monitor. The 45 cm bar uses the same asymmetric optical design as its bigger siblings, directing light onto the desk at a rated center illuminance of 930 lux from a 45 cm height, with a 60 x 30 cm coverage area at 500 lux. An ambient light sensor handles auto-dimming, and touch controls on top of the bar adjust brightness and color temperature across the full 2,700K to 6,500K range.

There are no extras here: no presence sensor, no backlight, no remote. Power comes from any USB port at 5V and up to 1A, so it can run straight from a monitor or PC USB socket without an adapter. The trade-off is fit. The clamp only suits monitors between 1 and 3 cm thick, which covers most flat gaming monitors but rules out many curved panels and very thin or very thick displays. Check your monitor’s top bezel depth before choosing it, and step up to the Pro or Halo 2 if your screen falls outside that range.

Specs

  • Light source: dual-color LED, front light only
  • Center illuminance: 930 lux at 45 cm height
  • Lighting coverage: 60 x 30 cm at 500 lux
  • Color temperature: 2,700K to 6,500K
  • Color rendering: CRI above 95
  • Controls: touch controls on the bar
  • Sensors: ambient light sensor with auto-dimming
  • Monitor fit: flat monitors 1 to 3 cm thick
  • Power: USB, 5V at up to 1A
  • Dimensions: 45 x 9 x 9.2 cm

Quntis ScreenLinear Pro+

Check price on Amazon

Tier: Mid-range

The ScreenLinear Pro+ is the value alternative to the BenQ bars, and it covers most of the same ground. The 51 cm aluminum bar uses a 45-degree asymmetric beam to light the desk without screen glare, with stepless brightness and a 3,000K to 6,500K color temperature range. A built-in ambient light sensor offers an auto-dimming mode that targets 500 lux, matching the office lighting level the BenQ bars aim for, and there is even a two-hour rest timer that flashes the light as a break reminder.

Control comes from a 2.4 GHz wireless remote puck, so adjustments do not mean reaching up and wobbling the bar, and the upgraded weighted clip fits monitors from about 0.3 to 6 cm thick, including curved shapes. Color rendering is rated Ra 95 or higher, the same headline figure as the BenQ models. The manual lists a 5 W draw over USB, a 1.8 m cable and a weight of 570 g. For a 27-inch to 34-inch monitor, this is the pick that delivers the core light bar experience, sensor and remote included, at the mid-range tier.

Specs

  • Model: LI-HY-0208-BK-QU
  • Light source: LED, front light only, 45-degree asymmetric beam
  • Bar length: 51 cm (20 inches)
  • Color temperature: 3,000K to 6,500K, stepless
  • Color rendering: Ra above 95
  • Controls: 2.4 GHz wireless remote, touch controls on the bar
  • Sensors: ambient light sensor with auto-dimming to 500 lux, two-hour rest timer
  • Monitor fit: flat and curved, about 0.3 to 6 cm thick
  • Power: USB, 5 W, 1.8 m cable
  • Weight: 570 g

Quntis Monitor Light Bar RGB Pro

Check price on Amazon

Tier: Budget

The RGB Pro is the gaming-flavored option in the Quntis range. Alongside the front task light, it carries a rear RGB backlight with 15 modes, so the wall behind the monitor gets the colored glow that battlestation builds usually need a separate light strip to achieve. The front light keeps the features that matter for actual work: stepless dimming, three color temperature settings and a color rendering rating of Ra 95, behind an asymmetric lens that keeps the beam off the screen.

It is a simpler product than the ScreenLinear Pro+ above it. There is no mention of an ambient light sensor or auto-dimming in the manufacturer’s listing, and the front light steps through three fixed color temperatures rather than a fully stepless range. Buyers should also note the fit guidance on the Quntis range: these bars are designed for desktop monitors rather than laptops. As the budget route to a dual-light setup with real desk illumination up front and RGB ambience behind, though, it fills a niche neither BenQ’s front-only bars nor a plain LED strip covers on its own.

Specs

  • Model: LI-HY-0211-BK
  • Light sources: front task light plus RGB rear backlight
  • Backlight: RGB, 15 modes
  • Color temperature: 3 settings, adjustable brightness with stepless dimming
  • Color rendering: Ra 95
  • Controls: on-bar controls
  • Monitor fit: desktop monitors, not intended for laptops
  • Power: USB powered
  • Extras: asymmetric no-glare optical design

How to Choose a Monitor Light Bar

Start with fit, because it rules models in or out immediately. Measure the thickness of your monitor at the top bezel and check the clamp range: the original ScreenBar only spans 1 to 3 cm, while the ScreenBar Pro and Halo 2 stretch from under half a centimeter to about 6.5 cm and officially support curved panels down to 1000R. Ultrawide owners should also match bar length to screen width; a 45 cm bar on a 49-inch super ultrawide leaves the edges of the desk in shadow, where a 50 or 51 cm bar covers the working area evenly.

Next, decide whether you want a backlight. Front-only bars light the desk, which is all a bright room needs. In a dark room, the jump in brightness between the monitor and the wall behind it is what tires your eyes, and a rear light such as the Halo 2’s tri-zone backlight or the RGB Pro’s colored glow narrows that gap. After that, look at controls and sensors. Auto-dimming that holds the desk near 500 lux removes constant fiddling, a presence sensor is a genuine convenience if you step away often, and a wireless dial is easier to use than touch buttons on top of the bar. Finally, check power: every bar here runs from USB, but the brighter models draw up to 8.5 W or 15 W, so confirm your monitor’s USB port or the included adapter can supply it.

Frequently Asked Questions

Do monitor light bars really reduce eye strain?

They address the two lighting problems that make long sessions uncomfortable. The asymmetric beam lights the desk without reflecting off the screen, so you are not fighting glare on top of the image, and a backlight model reduces the brightness contrast between the monitor and a dark room. They do not change the screen itself, so brightness and viewing distance settings still matter, but the lighting side of the equation is exactly what these bars fix.

Will a light bar fit a curved ultrawide monitor?

Only if the clamp is rated for it. Curved panels are thicker at the top edge and the curve changes how a clamp grips, so check both the thickness range and the supported curvature. In this roundup the BenQ ScreenBar Pro and ScreenBar Halo 2 officially cover 1000R to 1800R curves and thicknesses up to about 6.5 cm, while the original ScreenBar is limited to flat monitors 1 to 3 cm thick.

How bright should a monitor light bar be?

Around 500 lux at the desk is the level office lighting standards recommend for screen work, and it is the figure the auto-dimming modes on the BenQ and Quntis bars target. Higher peak ratings, such as the 1,000 lux center figures on the flagship bars, describe the brightest point under the bar rather than the whole desk, and they give headroom for larger desks and taller monitor arms. Stepless dimming matters more than the peak number, because the right level changes with the room.

Can a light bar block a webcam or damage the screen?

A well-designed clamp hangs from the top bezel with a counterweight and rubber contact points, so it does not press on the panel itself, and BenQ shapes its clamps to leave the center of the top bezel clear. If your webcam sits exactly where the clamp lands, look for a model with a webcam mount accessory, as included with the ScreenBar Pro and Halo 2, which moves the camera above the bar instead.

Conclusion

For most gaming desks, the BenQ ScreenBar Halo 2 is the complete package: strong front light, a real backlight for dark rooms, a wireless dial and sensors that make it disappear into the routine. Ultrawide and curved monitor owners who only need front light should take the ScreenBar Pro and its wider clamp range, while the original ScreenBar still serves a simple flat monitor well. On a tighter budget, the Quntis ScreenLinear Pro+ keeps the sensor, remote and 51 cm width that matter day to day, and the Quntis RGB Pro trades some refinement for an RGB backlight at the lowest tier. Measure your bezel first, then choose by the room you play in.

Related guides

Browse all Uncategorized guides →

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.